1. The drying technology of the traditional dryer is relatively simple, and the drying effect is good for materials with low drying difficulty. The sludge can be dried to achieve the desired effect. At the same time, the problem of the sludge dryer block must be solved. The mouth uses high temperature resistant materials to make large drying plates to initially disperse the sludge and make the sludge easier for the next step. Using a large drying plate is equivalent to preheating. The contact between the sludge and the drying plate absorbs heat and evaporates water vapor to reduce the water content.
2. A variety of combined lifting and dispersing devices are welded in the drying cylinder, which has a more perfect dispersing function than the modified traditional dryer. The high-speed operating device increases the contact area between sludge and hot air, greatly dispersing Sludge, such a professional configuration is difficult to agglomerate.
3. A cleaning device is added in the drying cylinder. This modification expands the application of the dryer, not only for drying other high-viscosity materials. In the past, the sludge stuck to the wall of the drying cylinder, adhered to the high-temperature baking, and the bulking device could not be touched, making it difficult to clean and causing headaches.
